Setrab ProLine STD Oil Coolers - Specialty / Multi-Pass
Setrab ProLine Multi-Pass oil coolers alter the flow path of the ProLine STD to optimize heat-rejection in specialized oiling systems.
Low-gpm flow-rate specialty environments such as gearboxes, differentials, and motorcycle-powered racing engines, benefit most from Setrab ProLine Multi-Pass oil coolers.
Setrab ProLine oil coolers feature M22 female ports, adaptable to virtually any size using SUSA ProLine Adapter Fittings.
(fittings and plugs sold separately)
Specifications
Ports: M22 ProLine (22mm x 1.5 female thread)
Max connection tightening torque: 40Nm (29.5 ft/lbs)
Material: Aluminum
Color: Black
Working Pressure: 0-10 Bar Dynamical
Max Pressure: 12 Bar (1x104 pulsations)
Burst Pressure: 37 Bar
Working Temp: -40 to 150 °C (Temperatures above 120 °C pressure
pulsations has to be evaluated)
Inner Cleanliness: ISO 4406 16/14 (alternative available upon request)
General Dimensional Tolerance: ISO 2768-v
Fluid Compatibility: Oil; water containing min. 40% glycol or corrosion
inhibitors.
Notes
Setrab STD ProLine Specialty oil coolers are to be mounted securely and isolated from vibration and flex. We recommend and offer mounting bracket kits for this reason, though custom brackets and mounting solutions may be used so long as the previously noted conditions are met.
The size of a cooler is dependent on system requirements. If you are unsure what size cooler you may need. Please use our contact page for a system consultation. Mounting and placement of the cooler are essential to its success. Size of lines is dependent on the cooling application: transmissions usually use -06 or -08, engine oil coolers commonly use -10 or -12 but could use size -06 to -16 depending on oil flow.
Fitment
Universal - Non-Specific.
Setrab ProLine STD Specialty oil coolers are used across the world in automotive and industrial applications. If you are looking for a direct replacement, please refer to the Part Number label on the top plate of the cooler.
The determined size of an oil cooler is dependent on the heat rejection requirements for a system. If you need assistance with the selection of a size, please use our contact page for a consultation.
Please refer to the Oil Cooler Page for recommended coolers and information on flow and heat rejection expectations as it may apply to your system.
Printable PDF: ProLine STD Multi-Pass / Specialty Oil Cooler Drawing