Setrab ProLine SLM Oil Coolers
Setrab ProLine SLM range oil coolers were developed for demanding applications where space is also very limited. ProLine SLM coolers feature the adaptability of the 22mm ProLine system, end-tank ports, and threaded mounting bosses.
The slimmed-down package is over 20% thinner than the ProLine STD range.
The design of Setrab's SLM range allows for a multitude of widths that are not possible in other style coolers.
Setrab ProLine oil coolers feature M22 female ports, adaptable to virtually any size using SUSA ProLine Adapter Fittings.
(fittings and plugs sold separately)
Specifications
Ports: M22 ProLine (22mm x 1.5 female thread)
Max connection tightening torque: 40Nm (29.5 ft/lbs)
Material: Aluminum
Color: Black
Working Pressure: 0-8 Bar
Max Pressure: 10 Bar
Burst Pressure: 30 Bar
Working Temp: -40 to 150 °C (Temperatures above 120 °C pressure
pulsations has to be evaluated)
Inner Cleanliness: ISO 4406 16/14 (alternative available upon request)
General Dimensional Tolerance: ISO 2768-v
Fluid Compatibility: Oil; water containing min. 40% glycol or corrosion
inhibitors.
Notes
Setrab SLM ProLine oil coolers are to be mounted securely and isolated from vibration and flex. We recommend and offer mounting bracket kits for this reason, though custom brackets and mounting solutions may be used so long as the previously noted conditions are met.
The size of a cooler is dependent on system requirements. If you are unsure what size cooler you may need. Please use our contact page for a system consultation. Mounting and placement of the cooler are essential to its success. Size of lines is dependent on the cooling application: transmissions usually use -06 or -08, engine oil coolers commonly use -10 or -12 but could use size -06 to -16 depending on oil flow.
Fitment
Universal - Non-Specific.
Setrab ProLine SLM oil coolers are used across the world in automotive and industrial applications. If you are looking for a direct replacement, please refer to the Part Number label between the female ports on the top plate of the cooler.
The determined size of an oil cooler is dependent on the heat rejection requirements for a system. If you need assistance with the selection of a size, please use our contact page for a consultation.
Please refer to the Oil Cooler Page for recommended coolers and information on flow and heat rejection expectations as it may apply to your system.
