sūsa HyperFlow Sandwich Adapter
- INSTRUCTIONS -
The sūsa HyperFlow Billet Sandwich Oil Filter Adapter provides easy access to the oil supply for installing Setrab ProLine Oil Coolers.
Engineered for performance, reliability, and integration with the sūsa ProLine M22 adapter fitting system, the sandwich oil filter adapter is machined from billet aluminum with generous positive flow characteristics. Designed to direct oil through the oil cooler at all times, it is particularly suited to dedicated racing vehicles.
Notes:
*The 19-SP76 does not work with -16 AN adapters. It is not necessary or recommended to use these larger size lines on the pressure side of a wet-sump oiling circuit utilizing an intermediate size spin-on oil filter. )
*This item does not work with banjo adapters fittings.
*Do not block off or plug the inlet/outlet M22x1.5 ports on a sandwich adapter when installed. This will cause blockage of oil flow and could result in catastrophic engine failure. If installing and not immediately plumbing an oil cooler, you must loop hoses from outlet to inlet to ensure an unobstructed flow path.
Included
- (x1) - sūsa HyperFlow Sandwich Adapter
- (x1) - 1/8" NPT Port Plug
- (x1) - Filter Extension Screw (thread pitch dependent)
- (x1) - Buna X-Profile O-ring
(fittings sold separately)
Fitment
Fitment specifications coming soon...
Offered in 3 common filter thread pitch applications:
- Thread Pitch: M20 x 1.5 ----- P/N: 19-SP76-20-22
- Thread Pitch: M22 x 1.5 ----- P/N: 19-SP76-22-22
- Thread Pitch: 3/4"-16 ------- P/N: 19-SP76-34-22
Specifications
- Inlet/Outlet Ports: M22 ProLine (22mm x 1.5 female thread)
-
Accessory Port: 1/8" NPT
- Max Torque for M22 ProLine fitting installation: 29.5 ft/lbs
- Torque for Sandwich Adapter to filter landing: 21-25 ft/lbs
- Torque for NPT port plug: 2-3 turns from finger tight
- Material: Aluminum
- Finish: Anodized Gray
- Working Temp: -40 to 150 °C
- General Dimensional Tolerance: ISO 2768-v
- Fluid Compatibility: Oil
-
O-ring: Buna x-profile, -229
Dimensions
